E3D V6 Plated Copper Hotend for High Temperature Printing

Trianglelab V6 Plated Copper Hotend High Temperature Nozzle Heat Block HeatBreak Heatsink For PETG PEEK PEI ABS Carbon Fiber 3D Printing (1.75mm, 24v, 0.4mm)

These nozzles are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500°C, and with much-increased thermal conductivity these copper nozzles are perfect for high temperature applications, while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE.
In addition to high temperature performance these nozzles have an advanced nickel based plating, considerably reducing the adhesion of plastic to the nozzle. This is great for everyday filaments keeping things clean and shiny, but is particularly important at temperatures above 300°C where a silicone sock can't be used.
Copper has more than 3x the thermal conductivity of brass, and the copper alloy we use has been hardened and treated to reduce the oxidation that occurs in copper at high temperatures. The higher thermal conductivity will also slightly increase your heat-up times, and can provide tighter temperature control.
This copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature printing that other nozzles can't handle.

Contents:
Trianglelab - V6 Plated Copper Nozzle (0.4mm) x 1
Trianglelab - V6 Plated Copper Heat Block x 1
Trianglelab -Tianium Alloy Heat Break x 1
Trianglelab - V6 Heatsink x 1
Trianglelab - 3010 Fan x 1
Trianglelab - 3010 Fan Bracket x 1
Trianglelab - Heating Cartridge 6x20MM 40W x 1
Trianglelab - Thermistor Cartridge 104GT-2 (Gift) x 1

*If you plan to print high temperature materials, the temperature is over 290℃. Please replace the thermistor, we recommend you use the PT1000 chip's thermistor cartridge.